• 0
  • 0

Introduction to Titanium Carbide TiC Powder

The Introduction of Titanium Carbide TiC Powder

Titanium carbide, also known as TiC is a common transition metal carbide featuring a NaCl Cubic crystal structure. high melting point, hardness with a high Young's modus, excellent chemical stability, high wear resistance and resistance to corrosion as well as high electrical conductivity and thermal conductivity. This means it can be used in numerous uses and great potential in cutting tools as well as aerospace components, high-wear coatings, foam ceramics, and infrared radiation ceramics materials.

Applications of Titanium Carbide TiC Powder

1. Utilized to create various multiphase materials

Titanium carbide ceramics belong to super hard tool materials TiC and TiN, WCand A12O and other raw materials comprised of multiphase ceramics The materials are known for their extremely high melting points, hardness, and high and excellent chemical stability. It is the material of choice for cutting tools, wear-resistant parts in addition, they are extremely electrically conductive, is the preferred material for electrodes.

Cutting tool material. Because of the proportion of TiC hard particle dispersion within the matrix, the composite cutting tools don't just to improve the hardness however, they also some extent, enhance the toughness of the fractures than the pure tool cutting capabilities a great deal. A12o3-tic-tic-system ceramics can be utilized as armor materials. A tool material the toughness is more than (C N, C), and Ti(C, N) because of N to use it on steel as well as other cutting materials the friction reduction is drastically reduced. This material has numerous advantages for cutting. Through the combination of the advantages of Ti and (C, N) to form multiphase clays, a highly effective tool material can be developed.

2. They are also used for coatings.

Diamond coating: This production technique used to make diamond tools is typically the impregnation of powder metal using the method. Because of the large interfacial energy between diamond and any general metal the surface of the diamond cannot be filled with alloys or other metals that has a low melting point and its bonding capability is not as good. In recent years, many researchers have conducted a great deal of research on enhancing the bond strength between diamond and metal matrix. The method that is active is the one most frequently used, namely, adding some titanium to strengthen the bond between metal and chromium, vanadium, and other active metals. When used for sintering liquid phase where the active material is made up of high carbon compounds. These form the elements and the diamond affinity is high, which enables improve the surface of diamond which allows the metallurgical combination of diamond and metal bond. The strength of the interface is influenced by the amount of active metal, sintering temperatures and duration as well as other parameters, and requires removal of the binder in order to enhance the activity of the metal to the interface as this technique is not suitable for hot press Sintering of diamonds and metal powder within a short solid phase.

3. For preparing foam ceramics

For filtration, foam ceramics are able to effectively eliminate inclusions in all types of fluids as well as its filtration process is Adsorption and agitation. The filter is dependent on the chemical strength of the product, particularly in the metallurgical sector with a high melting point filter, so this kind of material can become oxide most of the time, and also adapts to the filtering process of metal melt, the principal goal of thermal shock resistance. Titanium carbide ceramics are characterized by higher strength, toughness, electrical conductivity and heat, as well as corrosion and heat resistance than oxide foam ceramics.

4. Used in infrared radio ceramic materials

Titanium carbide can be described as a kind of intermetallic substance, and has usually shows good chemical stability with no change of valence state, and the system is under the condition of high-temperature reduction of preparation of samples. Some titanium ions have delay phenomenon and appear, hoping to titanium ion solid melting into the cordierite position and change in the structure. When compared to one material that is a single material, the radiation capability of the compound near 3tma is definitely improved, which is perfect for use in the field of high temperature.

Main Supplier of Titanium Carbide TiC Powder

We are a reliable global chemical material supplier & manufacturer that has more than 12 years' experience manufacturing top-quality chemicals, as well as Nanomaterials, such as silicon powder, nitride powder, Zinc sulfide, graphite, calcium Nitride, 3D Printing Powder such as.

If you're in the market for top-quality titanium carbide TiC-C Powder We invite you to contact us to send us an inquiry. (

Inquiry us

  • tags

Our Latest News

Zirconium Diboride Ceramics

What is Zirconium Diboride?Zirconium diboride chemical formula is ZrB2. Zirconium Diboride is a type of high covalent refractory ceramic with a hexagonal crystal structure.ZrB2 is an ultra-high temperature ceramic (UHTC) with a melting point of 3246…

What is alumina used for

Alumina residential or commercial propertiesHeat resistance: alumina can be utilized in oxidation and also reduction atmospheres approximately 1650°& deg; C( 2900 & deg; F )and in vacuum environments as much as 2000°& deg; C(3600 ° F). We…

How can Nano Silica change the properties of coatings

Nano silica has numerous residential properties that standard materials do not have. The particle dimension circulation of nano silica is really narrow, the majority of which are within 100 nm, with numerous micropores and big certain surface area. T…