What is the application of natural flake graphite?

Now China has become a powerful country in science and technology, but do you know how powerful China's technology is? The manned space station alone is not enough, and now it has successfully broken through the key technology of nuclear fusion, even leading the world by 15 years. Does this mean that China is not far from the artificial sun? It turned out that the fully superconducting tokamak nuclear fusion experimental device developed by China at the Hefei Research Institute of the Chinese Academy of Sciences successfully achieved a record of 101 seconds of continuous operation at 120 million degrees Celsius, and broke the world record. Compared with the previous record in South Korea, China has time has been directly extended by 5 times, and it seems that we are one step closer to the practical stage of artificial sun.
The success of nuclear fusion technology will lead to the development of natural flake graphite.

Natural flake graphite  are widely used in advanced refractories and coatings in the metallurgical industry. Such as magnesia carbon bricks, crucibles, etc. Pyrotechnic material stabilizer in military industry, desulfurization accelerator in smelting industry, pencil lead in light industry, carbon brush in electrical industry, electrode in battery industry, catalyst in fertilizer industry, etc. After in-depth processing of flake graphite, graphite milk can be produced, which is used in lubricants, mold release agents, wire drawing agents, conductive coatings, etc. It can also produce expanded graphite, which is used as raw material for flexible graphite products, such as flexible graphite seals and flexible graphite composite products.

coating

As a functional filler of coatings, flake graphite is mainly used in anti-corrosion coatings, fire-retardant coatings and conductive coatings.

As an anti-corrosion material, it is an anti-rust primer made of carbon black, talc and oil, which has good chemical and solvent corrosion resistance; if chemical pigments such as zinc yellow are added to the formula, the anti-rust effect is better.

Expandable graphite is used as a fireproof filler, which is a graphite interlayer compound obtained by chemical or electrochemical treatment with natural graphite flakes as raw materials. Under the condition of heat, the volume of expandable graphite expands rapidly (up to 300 times), which suffocates the flame, and at the same time generates expandable materials, which can isolate the flame, delay or interrupt the spread of the flame, and is non-flammable, with good flexibility and high surface energy. , the carbonized layer has good strength. However, the volume and amount of the expansion body should be selected appropriately. The test shows that 150um particles, 30% expansion ratio, and 5% dosage are the most suitable.

Graphite flakes can be directly used as carbon-based conductive fillers or made into composite conductive fillers for conductive coatings. However, due to the large amount of graphite flakes added, the performance of the coating will become brittle and its application will be limited. Therefore, measures should be taken to further improve the conductivity of graphite and effectively reduce the amount of graphite flakes added. The domestic Tianhua Chemical Machinery Research Institute has developed a high-temperature corrosion-resistant resin as the base material and large flake solid graphite flakes with strong electrostatic conductivity as the main aggregate, which has high body strength and good wear resistance.

The chopped fiber material with good resistance to deformation and cracking is a solvent-free thick-film conductive coating with functional fillers. The coating has the characteristics of anti-corrosion medium penetration, low curing residual stress, good resistance to matrix deformation and cracking, stable construction performance, and long-term static electricity conduction. It can be used for electrostatic conductive coating on the inner wall of crude oil storage tanks. According to data reports, electroless plating technology is used to coat graphite powder with metals, such as copper, nickel, silver, etc. to prepare composite conductive fillers, which are used in conductive coatings in an amount of 30%, which not only has good electrical conductivity, but also has further corrosion resistance. improve.

High-quality natural flake graphite manufacturer

Luoyang Moon & Star New Energy Technology Co., LTD, founded on October 17, 2008, is a high-tech enterprise committed to developing, producing, processing, selling, and technical services of lithium-ion battery anode materials. After more than ten years of development, the company has gradually developed into a diversified product structure with natural graphite, artificial graphite, composite graphite, intermediate phase and other harmful materials (silicon-carbon materials, etc.). The products are widely used in high-end lithium-ion digital power and energy storage batteries.

If you are looking for graphite or lithium battery anode material, click on the needed products and send us an inquiry：sales@graphite-corp.com.

The COVID-19 pandemic has affected economies and chemical companies in many countries around the world. Measures such as extending holidays and resuming work were taken to control the development of the epidemic, and the normal operation of some chemical enterprises was also affected to some extent.

We provides high quality natural flake graphite with reasonable price. “In order to feedback to old customers, the company is still in full operations to provide natural flake graphite with competitive price.” said Olina, the sales manager.

Chemical natural flake graphite, feel free to contact us.

Inquiry us